v20100s-e3, vf20100s-e3, VB20100S-E3, vi20100s-e3 www.vishay.com vishay general semiconductor revision: 13-dec-16 1 document number: 88975 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage trench mos barrier schottky rectifier ultra low v f = 0.446 v at i f = 5 a features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath temperature 275 c maximum, 10 s, per jesd 22-b106 (for to-220ab, ito-220ab, and to-262aa package) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in high frequency converters, switching power supplies, freewheeling diod es, or-ing diode, dc/dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220ab, to-263ab and to-262aa molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs max. primary characteristics i f(av) 20 a v rrm 100 v i fsm 250 a v f at i f = 20 a 0.69 v t j max. 150 c package to-220ab, ito-220ab, to-263ab, to-262aa diode variation single die v20100s vf20100s vi20100s vb20100s pin 1 pin 2 pin 3 k 1 2 3 1 k 2 3 to-220ab to-263ab nc a k heatsink nc a k pin 1 pin 2 pin 3 pin 1 pin 2 case pin 3 to-262aa tmbs ? ito-220ab 1 2 3 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol v20100s vf20100s vb20100s vi20100s unit max. repetitive peak reverse voltage v rrm 100 v max. average forward rectified current (fig. 1) i f(av) 20 a peak forward surge current 8. 3 ms single ha lf sine-wave superimposed on rated load i fsm 250 a non-repetitive avalanche energy at t j = 25 c, l = 60 mh e as 210 mj peak repetitive reverse current ? at t p = 2 s, 1 khz, t j = 38 c 2 c i rrm 1.0 a voltage rate of change (rated v r ) dv/dt 10 000 v/s isolation voltage (ito-220ab only) ? from terminal to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg -40 to +150 c
v20100s-e3, vf20100s-e3, VB20100S-E3, vi20100s-e3 www.vishay.com vishay general semiconductor revision: 13-dec-16 2 document number: 88975 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms ? ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 10 ma t a = 25 c v br 105 (min.) - v instantaneous forward voltage i f = 5 a t a = 25 c v f (1) 0.51 - v i f = 10 a 0.60 - i f = 20 a 0.79 0.90 i f = 5 a t a = 125 c 0.45 - i f = 10 a 0.53 - i f = 20 a 0.69 0.76 reverse current v r = 70 v t a = 25 c i r (2) 17 - a t a = 125 c 7 - ma v r = 100 v t a = 25 c 70 500 a t a = 125 c 14 30 ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol v20100s vf20100s vb20100s vi20100s unit typical thermal resistance r ? jc 2.0 4.0 2.0 2.0 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab v20100s-e3/4w 1.88 4w 50/tube tube ito-220ab vf20100s-e3/4w 1.75 4w 50/tube tube to-263ab VB20100S-E3/4w 1.37 4w 50/tube tube to-263ab VB20100S-E3/8w 1.37 8w 800/reel tape and reel to-262aa vi20100s-e3/4w 1.45 4w 50/tube tube case temperature (c) average forward current (a) 24 20 16 12 4 0 0 25 50 75 100 125 150 175 v20100s vi20100s vf20100s vb20100s resistive or inductive load 8 0 2 4 6 8 10 12 14 16 18 20 0 4 8 12 16 20 24 d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 average forward current (a) average power loss (w) d = t p /t t p t
v20100s-e3, vf20100s-e3, VB20100S-E3, vi20100s-e3 www.vishay.com vishay general semiconductor revision: 13-dec-16 3 document number: 88975 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - typical junction capacitance fig. 6 - typical transient thermal impedance fig. 7 - typical transient thermal impedance ? ? ? ? 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 t a = 150 c t a = 125 c t a = 25 c instantaneous forward voltage (v) instantaneous forward current (a) 0.001 0.01 0.1 1 10 100 10 20 30 40 50 60 70 80 90 100 percent of rated peak reverse voltage (%) instantaneous reverse current (ma) t a = 150 c t a = 125 c t a = 25 c 10 100 1000 10 000 0.1 1 10 100 reverse voltage (v) junction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mvp-p 0.001 0.01 0.1 1 10 0.01 0.1 1 10 100 t - pulse duration (s) transient thermal impedance (c/w) junction to case v(b,i)20100s 1 10 0.01 0.1 1 10 100 t - pulse duration (s) transient thermal impedance (c/w) junction to case vf20100s
v20100s-e3, vf20100s-e3, VB20100S-E3, vi20100s-e3 www.vishay.com vishay general semiconductor revision: 13-dec-16 4 document number: 88975 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.415 (10.54) 0.380 (9.65) 0.635 (16.13) 0.625 (15.87) pin 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.161 (4.08) 0.139 (3.53) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pin 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.057 (1.45) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38)
v20100s-e3, vf20100s-e3, VB20100S-E3, vi20100s-e3 www.vishay.com vishay general semiconductor revision: 13-dec-16 5 document number: 88975 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-262aa 0.401 (10.19) 0.381 (9.68) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pin 0.411 (10.45) 0.380 (9.65) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) to-263ab 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) mi n . 0.15 (3.81) mi n . 0.33 (8.38) mi n . 0.42 (10.66) mi n . n ca k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) mi n . mounting pad layout
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
